Like HTT on Facebook New 2023 Elite Trailers Horse Trailer for sale (300788)
Horse Trailer Trader - A World of Selection  
Login   |  Favorites

New Horse Trailer
2023 Elite Trailers 4G



Dealer Stock #: E20994
Horses: 4
Hitch Type: Gooseneck
Load Type: Slant
Construction: Steel Frame +AL

Has Manger
Axles: 2
LWH: L: 21.00' W: 7.50' H: 7.00'
GVW: 17569
Empty Weight: 7440

NEW 2023 Elite Trailers 4 Horse GN Trailer Fully Loaded With Up To 1,500 Miles Of Free Delivery! WE ARE OFFERING UP TO 1,500 MILES OF FREE DELIVERY ON THIS TRAILER! GVW: 17, 569 LBS Empty Weight: 7,440 LBS Upgraded Features: Width: 7’6” Footage: 52” rear stall Footage: 68” short wall dress Jack: 12k hydraulic single leg jack with cover Battery: single battery box wired up with battery Tires: LT235/85R16 load range G wheel and tire (ILO standard load range E)-rated 3,750# each Nose: stainless steel on nose Door: drop down door with window ILO standard with latch placed at bottom- 1st and 3rd stall curbside Bars: drop down window bars with custom latch system Door: move rear door tack door to street side-make rear tack same depth as manger-makes 1 large load door with window, single pipe hardware and full width butt chain Door: dressing room with window Door: 40” dress door street side, 40” dress door curbside 30” bod Manger: manger (per horse) 18” deep-48” to top of lip above rubber-4-3/4” deep pan (1 door every 2 mangers) Manger: add manger access door Light:3/4” button LED running lights Light: Additional 3/4” button LED running lights, 5 each side, 3 on nose Light: LED ”awning style” load light- chrome plastic housing (2” x 18”) (700 lumens each)-2 street side, 2 curbside, rear Light: Additional standard LED dome lights (390 lumens) (each)- 2 dress, 2 horse area, 1 rear tack, 2 mangers Bars: additional blanket bar (each) Bars: make blanket bar rack swing out- makes 4 on swing out on curbside and street side dressing doors Saddle rack: additional saddle rack (each saddle) Saddle rack: offset swingout post for saddle racks- makes 4 on swing out on street side and curbside Hooks: bridal hooks welded on bar-makes 20 bridal hook wall, 5 broom closet Trays: addition brush trays- makes 2 on street side and 2 on curbside dress doors Mats: floor mats in dressing area Mats: werm flooring in horse area ILO standard rubber floor mats Carpet: carpet on bulkhead wall and bed/drop Step: fold up step (12” tall extruded) running board stops at dress doors Misc: reinforcement structure Roof: insulate and line roof and top rail with white skin- horse area Box: carpet boot box with split, hinged lid, full width of drop Lock: keyless dead bolt lock- dress doors Hay rack: 8’ aerodyne hayrack with ladder and tie rail Standard Features: * Exterior - 2-5/16” Adjustable Coupler with Safety Chains and Breakaway Kit * Full Length Side Slats with White Smooth Sheets Above * 8’ Long Nose with 2’ Taper * .040 One Piece Aluminum Roof Sheet * Single Speed Jack * Rubber Torsion Axles with Electric Breaks * Radial Tires with Steel Wheels * Stainless Steel Wheel Simulators * Hehr 19”x34” Nose Windows * Hehr 15’x34” Sliding Windows with Welded Bars (Hip Side) * Dressing Room Door with Camper Latch and Hehr Windows * Drop Down Feed Doors with Hehr Windows (Head Side) * Escape Door on Streetside at 1st Horse with Locking Seal Plate* * 56/44 Double Rear Doors with Hehr Windows and Locking Seal Plates * 4” Rubber Docking Bumper * Halogen Load Light at Rear * 7 Way Plug and Wiring * Recessed Exterior Light Switches * LED High and Low Turn Signals at Rear * LED Dome and Clearance Lights Horse Area- * Breast/Butt Bars at All Horse Area Doors * Two Exterior and Interior Ties (per Stall) * Lined and Insulated Head and Rump Walls * Rubber on Wall at Hip/Head/Wall in Horse Area * .125 Smooth Aluminum Floor (5052 Marine Grade) * Premium Rubber Mats on Floor in Horse Area * Slatted Dividers with Stall Pads * One Feed Bag per Horse * One Roof Vent per Stall * Bulkhead Wall Dress- * Marine Carpet on Dress Floor, Drop and Bed * Tack - Permanent Rear Tack * One Saddle Rack per Horse * Blanket Bar * 10 Bridle Hooks * Brush Trays Trailer Details: Components- Doors: All Elite built doors are engineered with heavy duty, proprietary extrusions and constructed to allow for maximum seal. Drop Bars: Elite built drop down bar mechanism is machined to allow ease of use. Independent from the drop down door allows for simple use Lighting: Elite utilizes LED interior and exterior clearance lighting in all wiring harnesses. All wiring connections are plugs or are soldered, covered with heat shrink material. Horse Dividers: With multiple divider types, the Elite divider is built with designed extrusions that give it maximum strength Bulkhead Wall: .090” smooth sheet welded on to our heavy duty wall posts. Lining and Insulation: With 4 tiers of protection, Elite Horse Trailers provide the protection from horses kicking and pawing, and help prevent sidewall damage and exterior dings. Axles and Tires: Elite uses Dexter Rubber Torsion axles with electric brakes and name brand tires. Our trailers are engineered with accurate weights that provide proper axle and tire size based on the total weight of the trailer and it’s contents, including living quarters. Hinges: Elite’s proprietary, heavy duty, extruded hinge is used for doors and dividers. This hinge is fitted with a brass fitting that lubricates and allows for a tighter fit with the stainless pin. This hinge is welded to the structure to give us the strongest hinge possible. Windows: Elite only uses HEHR windows. Available in many sizes and types, you can rest assured that they will be installed, worry free. Saddle Racks: The Elite built carpeted saddle racks are designed to hold a large variety of today’s saddles. Wall Rubber: The wall rubber on our trailers is corded rubber matting that is able to absorb impacts that would damage lesser made products. Carpet: Marine grade carpeting is used in the tack room and other applications to assure a long life. Structure- Top Rail: Continuous 5” radius rail with an overall height of 8” and a material thickness of 3/16” with an integrated drip rail. Drop Gusset: 3/16” thickness, welded one piece gussets which add structure to provide maximum nose strength. Drop Wall: 3/16” thickness with an engineered break on the top and bottom adds strength and allows for a cleaner weld area to ensure against leakage. Flooring: Elite’s floor structure consists of 4” I beams with an upper 2 1’2” flange and a lower 3” flange on 12” centers. Elite utilizes a .125” thick, 5052 marine grade sheet floor on top of the structure. Rear Frame: The rear frame is supported by a 2 1/2” x 5” upper header at a 1/4” thickness. For added strength, the rear frame side post is integrated through the floor into the bottom rail. Aluminum Side Wall Construction: 6005 T6 aluminum alloy posts with 7” posts at the drop wall, 5” x 1 3/8” at doors and dividers, and 1 3/8” x 2 1/2” for all other side wall structure posts. The exterior, 6063 aluminum interlocking extruded slat is .125 thick.

Contact The Trailer Specialist

Payment calculator

$ / month

Estimated payment for
Check with dealer or lender for actual payments.

Down Payment

Trade-in Value

Payoff Amount

Trailer Price


Interest Rate (APR)
Sales Tax Rate

View All Dealer Inventory

Established in 1988, The Trailer Specialist Inc. has been a family-owned and operated business even to this day. Currently running the company today, Wyatt and Carol Gibbs believe trailers have always been a way of life, a necessity to continue their day to day activities. “We live this life.

The family relies heavily on their trailers, for everything from hauling their children’s horses to rodeos and team roping’s, to taking their dirt bikes and ATV’s out for a fun weekend. At the Gibbs household, there is always something that needs to be done that requires a trailer. At Trailer Specialist, customers can rest assured that this family will have their best trailer interest in mind.

Both in servicing and selling trailers, who better to serve the public than a consumer of the products they’re selling? At the Trailer Specialist, each trailer is repaired precisely to perfection just as Wyatt and Carol Gibbs would expect their trailers to be.

This family based company knows first-hand what their clients are looking for and expecting when in search of a new trailer. That’s why the Gibbs make it their goal to accomplish every expectation to the fullest. Even when hiring employees to be a part of their team, the Gibbs choose experts who will have the knowledge and desire to serve each customer’s needs to the best of their ability.


At Trailer Specialist Inc. the customer comes first.